APC Smart-UPS VT 400V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

UGX6,700,000.00 – UGX71,000,000.00

Key Features
Max. Capacity Used	100%
Output power capacity	12.0kWatts / 15.0kVA
Output Connections	1) Hard wire 5-wire (3P + N + E) (Battery Backup) (1) Screw terminals (Battery Backup) (1) Hard wire 4-wire (3P + E) (Battery Backup)
Nominal Output Voltage	400V 3PH
Nominal Input Voltage	400V 3PH
Input Connections	Hard wire 5-wire (3P + N + E)

Brand:

SKU: N/A

Category: UPS and Backup

Description
Additional information

Technical Specification

Availability
Intelligent battery management	Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification	Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test	Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Manageability
Audible alarms	Provides notification of changing utility power and UPS power conditions
LED status display	Quickly understand unit and power status with visual indicators
Marketing features
Battery-protected and surge-only outlets	Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Protection
Battery and surge-protected outlets	Back up and protect your hardware and data during power outages, surges, and spikes.
Surge only outlets	Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Safety
Safety-agency approved	Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output
Max Configurable Power (Watts)	12.0kWatts / 15.0kVA
Output Frequency (sync to mains)	50/60 Hz +/- 1 Hz Sync to mains
Topology	Line interactive
Waveform type	Stepped approximation to a sinewave
Transfer Time	6 ms typical : 10 ms maximum
Topology	Double conversion online
Waveform type	Sine wave
Bypass	Built-in maintenance bypass, Built-in static bypass
Output Voltage Note	Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Input
Input frequency	40 – 70 Hz Auto-sensing
Input voltage range for main operations	304 – 477V
Number of Power Cords	1
Input Power Factor at Full Load	0.98
Batteries & Runtime
Battery type	VRLA
Typical recharge time	5hour(s)
Nominal Battery Voltage	+/- 192 V (split battery referenced to neutral)
Included Battery Modules	2
Battery Slots Empty	2
Expected Battery Life (years)	3-5
End of Discharge Battery Voltage	+/- 154 V
Extendable Run Time	1
Battery Charge Power (Watts)	995 Watts
RBC Quantity	2
Communications & Management
Interface Port(s)	DB-9 RS-232, Smart-Slot
Emergency Power Off (EPO)	Yes
Control panel	LED Status display with on line : on battery
Audible Alarm	Alarm when on battery : distinctive low battery alarm
Surge Protection and Filtering
Surge energy rating	156Joules
Data Line Protection	RJ45 10/100/1000 Base-T Ethernet protection
Physical
Maximum Height	1490MM, 149.0CM
Maximum Width	523MM, 52.3CM
Maximum Depth	842MM, 84.2CM
Net Weight	415.0KG
Shipping weight	445.91KG
Shipping Height	1643MM, 164.3CM
Shipping Width	650MM, 65.0CM
Shipping Depth	1062MM, 106.2CM
Color	Black
Units per Pallet	1.0
Environmental
Operating Temperature	0 – 40 °C
Operating Relative Humidity	0 – 95%
Operating Elevation	0 – 1015.9meters
Storage Temperature	-50 – 40 °C
Storage Relative Humidity	0 – 95%
Storage Elevation	0 – 15240meters
Audible noise at 1 meter from surface of unit	464.0dBA
Online thermal dissipation	2170.0BTU/hr
Protection Class	IP20
Conformance
Approvals	C-Tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111
Standard warranty	1 years repair or replace
Sustainable Offer Status
RoHS	Compliant